Thermocode 2 Printer manual Version 2.04 January 2011 3
Index
3
Page No
.
This Page 3
Standard Warranty Terms and conditions 4
Safety Instructions. 5
Introduction. 6
System Overview. 6
Optional Extras. 6
Printer Technical Information 6
Installation Procedures 7 - 10
Setting the Five Volts 11
Control Relays 12
Power Supply (I/O Board connections) 13
Power Supply (PNP / NPN Sensors & Volt Free print signals) 14
Power Supply (fuse details etc) 15
Power Supply (LED details) 16
Encoder Description 17
Encoder & Lower Roller Unit, Power Supply Wiring Connections 18
Encoder Types and Wiring Connections 19
System Start Up Sequence 20 - 21
Mini-Terminal Key Mapping 22
Mini Terminal Flow Charts 23 - 29
Quick Selection Reference Sheets 30 - 32
Thermal Ribbon Specification 33
Threading Diagram 34
Cleaning 35 - 36
Fault Finding. 37 - 40
Ribbon Not Indexing Enough, Ribbon Indexing Excessive 37
Ribbon Breaking or Perforated, Ribbon Tracking. 37 - 39
Print Quality Problems 39
Clearing Printer Error Messages 39
Thermocode Diagnostics Sheet 1 40
Thermocode Diagnostics Sheet 2 40
Error Codes 41 -48
Automatic Burn Compensation As Speed Changes 49
Magazine Spares 50
Dimensions
Printer Dimensions 51
Standard Frame Dimensions 52
Lower Roller Unit Dimensions 53
Power Supply (Dimensional and Installation Details) 54
Computer Connection leads. 55
Airborne Noise Emissions 55
Open Date Group Companies Addresses 56
To Next Page
Loading...