Open Technologies NeWay - Unloading the Object; Stopping Measures; Unauthorized Uses

Open Technologies S.r.l.
1.21. UNLOADING THE OBJECT
The unloading operation of the object includes:
- Removing the Reference rim, if present;
- Extraction of the used accessory;
- Removing the scanned object from the used accessory.
If the Articulator plate is used:
- Removing the scanned articulator;
- Removing the scanning plate.
1.22. STOPPING MEASURES
Stop the machine by:
- pushing the front button;
- switching off with the back main switch.
During maintenance operations, it is advisable, for safety purposes, to unplug the machine as well as switching
it off.
1.23. UNAUTHORIZED USES
IT
IS
FORBIDDEN:
To operate the 3D scanner if the safety devices supplied with the installation are not present
or working.
To use the machine outdoors in the rain.
To modify or tamper with the machine.
To clean during scanning.
To carry out ordinary maintenance without unplugging the machine.
Table 1 Unauthorized uses
Edit N°: 00 - Rev. N°: 01 of 07/17/17 USE INSTRUCTIONS MANUAL
Nome file: NeWay User Manual 2017 rev01.odt Pag. 19 di 26