Open Technologies S.r.l.
3. INTRODUCTION
This manual refers to the 3D scanner and addresses the users, who, before performing any operation, use or
maintenance, must read and acquaint themselves with the material in the following pages in order to use the
machine correctly, avoiding the improper uses listed later on. Before turning the machine on make sure the user
is suitable for the job.
The manufacturer refuses any responsibility for consequences deriving from:
- Use or installation not contemplated in this manual,
- Disassembly, modifications or replacement of original parts or components with parts or
components of different origin without written agreements with the manufacturer,
- Unsuitable power supply,
- Serious inadequacy of the required maintenance
This manual reflects the technical standing at the time the machine was manufactured and it should not be con-
sidered inadequate just because based on new experiences it can be updated. The features and design of this
machine may be modified without any notice, for a constant improvement of the product.
Open Technologies S.r.l. reserves all their rights on this manual, no whole or partial reproduction is al-
lowed without its written authorization.
4. NORM REFERENCES
In drafting this document, we have referred to what is reported in attachment I of Law n. 17 of 27/01/2010, im-
plementation of the 2006/42/EC Directive.
In the planning, construction and realization of the machine a set of technical norms has been used as refer-
ence to meet the requirements of the laws in force on the subject of safety on the job (see attachment).
5. PRESENTATION OF THE MACHINE
NeWay is a sophisticated 3D optical scanner for the no contact acquisition of three-dimensional shapes.
The technology it uses is called active stereo vision: structured light patterns are projected on the surface of the
object and acquired by two video cameras.
Edit N°: 00 - Rev. N°: 01 of 07/17/17 USE INSTRUCTIONS MANUAL
Nome file: NeWay User Manual 2017 rev01.odt Pag. 5 di 26
To Next Page
Loading...