GSM/3G User Manual
35 | 82
4. VOIP
VOIP Endpoints
This page shows everything about your SIP&IAX2, you can see status of each
SIP&IAX2.
Figure 4-1 SIP&IAX2 Endpoints
Add New SIP Endpoint
Main SIP Endpoint Settings
You can click button to add a new SIP endpoint, and if you want to
modify existed endpoints, you can click button.
There are 3 kinds of registration types for choose. None, Server or Client.
You can configure as follows:
If you set up a SIP endpoint by registration “None” to a server, then you can’t register
other SIP endpoints to this server. (If you add other SIP endpoints, this will cause Out-
band Routes and Trunks confused.)
To Next Page
Loading...
