OpenVox WGW1002G - Paesing and Compatibility

GSM/3G User Manual
47 | 82
Match
External Address
Locally
Only substitute the externaddr or externhost setting if it
matches.
Dynamic
Exclude Static
 Disallow all dynamic hosts from registering as any IP
address used for statically defined hosts. This helps avoid the
configuration error of allowing your users to register at the same
address as a SIP provider.
Externally Mapped
TCP Port
 The externally mapped TCP port, when the gateway is behind a
static NAT or PAT.
External Hostname
The external hostname (and optional TCP port) of the NAT.
Hostname
Refresh Interval
How often to perform a hostname lookup. This can be useful
when your NAT device lets you choose the port mapping, but
the IP address is dynamic. Beware, you might suffer from
service disruption when the name server resolution fails.
Table 4-12 Definition of RTP Settings Options
Options
Definition
Start of RTP Port Range
Start of range of port numbers to be used for RTP
End of RTP port Range
End of port numbers to be used for RTP
Paesing and Compatibility
Table 4-13 Instruction of Parsing and Compatibility
Options
Definition
Strict RFC Interpretation
 Check header tags, character conversion in URIs, and
multiline headers for strict SIP compatibility(default is yes)
Send Compact Headers
Send compact SIP headers
SDP Owner
Allows you to change the username filed in the SDP
owner string. This filed MUST NOT contain spaces.
Disallowed SIP Methods
The external hostname (and optional TCP port) of the
NAT.
Shrink Caller ID
 The shrinkcallerid function removes '(', ' ', ')', non-trailing
'.', and '-' not in square brackets. For example, the caller