OpenVox WGW1002G - Groups

GSM/3G User Manual
56 | 82
The above special matching sequences can be used for
CallerID matching similar to other number matches.
Set the Caller
ID Name to
 What caller ID name would you like to set before sending this
call to the endpoint.
Set the Caller
ID Number to
 What caller number would you like to set before sending this
call to the endpoint.
Forward Number
 What destination number will you dial? This is very useful
when you have a transfer call.
Failover Call Through
Number
 The gateway will attempt to send the call out each of these in
the order you specify. You can create various time routes and
use these time conditions to limit some specific calls.
Figure 5-3 Time Patterns that will use this Route
If you configure like this, then from January to March, from the first day to the last day of
these months, from Monday to Thursday, from 00:00 to 02:00, during this time (meet all
above time conditions), all calls will follow this route. And the time will synchronize with
your Sever time.
Figure 5-4 Failover Call Through Number
You can add one or more “Failover Call Through Numbers”.
Groups
Sometimes you want to make a call through one port, but you don’t know if it is available,
so you have to check which port is free. That would be troublesome. But with our