GSM/3G User Manual
41 | 82
Main IAX2 Endpoint Settings
You can click button to add a new IAX2 endpoint, and if you
want to modify existed endpoints, you can click button.
There are 3 kinds of registration types for choose. You can choose None, Endpoint
registers with this gateway(work as a Server) or This gateway registers with the
endpoint(work as a Client).
You can configure as follows:
If you set up a IAx2 endpoint by registration “None” to a server, then you can’t register
other IAX2 endpoints to this server, just authenticate the username and password.
Figure 4-5 None Registration
For convenience, we have designed a method that you can register your IAX2 endpoint
to your gateway, thus your gateway just work as a server.
To Next Page
Loading...
