GSM/3G User Manual
73 | 82
Name of the manager without space
Password for the manager. Characters: Allowed characters
“-_+.<>&0-9a-zA-Z”. Length:4-32 characters.
If you want to deny many hosts or networks, use char &
as separator. <br/><br/>Example: 0.0.0.0/0.0.0.0
or 192.168.1.0/255.255.255.0&10.0.0.0/255.0.0.0
If you want to permit many hosts or network, use char &
as separator.<br/><br/>Example: 0.0.0.0/0.0.0.0
or 192.168.1.0/255.255.255.0&10.0.0.0/255.0.0.0
General information about the system and ability to run
system management commands, <br/>such as Shutdown,
Restart, and Reload.
Information about channels and ability to set information in
a running channel.
Logging information. Read-only. (Defined but not yet used.)
Verbose information. Read-only. (Defined but not yet used.)
Permission to run CLI commands. Write-only.
Information about queues and agents and ability to add
queue members to a queue.
Permission to send and receive UserEvent.
Ability to read and write configuration files.
Receive DTMF events. Read-only.
Ability to get information about the system. CDR Output of
cdr, manager, if loaded. Read-only.
Receive NewExten and Varset events. Read-only.
Permission to originate new calls. Write-only.
Select all or deselect all.