Operating the System 39
AS7200 User Manual - OPEX Corporation
Assigning page sub-types
If one or more of the page types in the current job also contain sub-types, you
must assign the document a sub-type before scanning it into the system. To
assign a page sub-type:
1 While running a job, press the appropriate page type button. For example, if
you are scanning cash into the system, press the C
ASH page type button.
2 Select from the available page sub-types.
Figure 13: Assigning a page sub-type
3 Scan the document.
Note: If you do not assign a page sub-type before you scan an eligible
document, the system will assign the default page sub-type to the
document. For example, if you are scanning cash and you have the
1-dollar bill set up as the default, all the cash you scan will be classified
as 1-dollar bills unless you assign another sub-type as described.
To Next Page
Loading...
