42 Operating the System
AS7200 User Manual - OPEX Corporation
Delete window (Figure 14) will appear.
Figure 14: Confirm delete
Note: It is not possible to delete a single document image from the middle of
the batch. If you need to delete an image from the middle of the batch,
you must also delete all the images to the end of the batch as well.
Voiding documents and transactions
The void functions allow you to mark a scanned document or transaction as
invalid by placing a VOID stamp over the document’s image(s). Use the void
functions, for example, as an alternative to the delete functions if you would like
to keep a record of the fact that a document was scanned into the system and
later deemed invalid.
Note: The V
OID buttons will only be present if activated for the current job.
To Next Page
Loading...
