Opticon LPN5627 - Scanner Timeout (Trigger Enabled Mode Only)

Manual No. 25-ULPNR101-03; Feb, 2003 LPN5627 / LPR5627 Laser Fixed Mount
Scanner
Page 55
25. Scanner Timeout (Trigger Enabled Mode only)
These commands, which are only applicable in the Trigger Enabled mode, establish the time-out period
after the trigger pulse is received. The Time-out period is the same whether the scanner is operating in
Single, Multiple or Continuous Read mode.
Computer
Command
Function
/Description
Bar Code
Command
(Z7)
START/END
Programming Menu
-[8-
Y0
Trigger remains ON
as long as trigger is pulled
(hardware trigger only)
-Z1-
Y1
1 Second after triggering
-Z2-
Y2
2 Seconds after triggering
-Z3-
%
Y3
3 Seconds after triggering
-Z!-
Y4
4 Seconds after triggering
-Z5-
Y5
6 Seconds after triggering
-Z6-
Y6
8 Seconds after triggering
-Z7-
Y7
10 Seconds after triggering
-Z8-