Opticon LPN5627 - Transmitting Error Indications (Trigger Enabled Only); Print Quality Adjustments

Manual No. 25-ULPNR101-03; Feb, 2003 LPN5627 / LPR5627 Laser Fixed Mount
Scanner
Page 57
27. Transmitting Error Indications (Trigger Enabled only)
Computer
Command
Function
/Description
Bar Code
Command
(Z7)
START/END
Programming Menu
-[8-
5E
Do not transmit error code
-6F-
%
5F
Transmit “BR” <CR> for bad
read or no read
-6G-
5G
Transmit <STX>“>”<ETX>
for bad read;
<STX>“?”<ETX> for no read
-6H-
5H
Transmit “>”<CR> for bad read
Transmit “?”<CR> for no read
-6I-
5I
Transmit “CAN”<CR> for bad
read or no read
-6J-
5J
Transmit <STX>“CAN”<ETX>
for bad read or no read
-6K-
28. Print Quality Adjustments
Computer
Command
Function
/Description
Bar Code
Command
(Z7)
START/END
Programming Menu
-[8-
X4
For lower density, poor print
quality bar code, e.g., dot matrix
with voids (low analog gain)
-Y5-
X5
For high density, good print
quality bar code without voids
(high analog gain)
-Y6-
X6
Output data obtained from Low
or High analog gain
-Y7-
%
X7
Output data obtained from Low
and High analog gain
-Y8-