Opticon LPN5627 - Section 2 Technical Specifications; Physical Specifications; Symbologies Supported; Optical Specification

Manual No. 25-ULPNR101-03; Feb, 2003 LPN5627 / LPR5627 Laser Fixed Mount
Scanner
Page 2
This Quick Start-Up procedure will get you started. However, to best understand the full capabilities of
this scanner, you should read the complete manual.
Section 2
Technical Specifications
Physical Specifications
Case Material Zinc-die cast
Dimensions 1.9 x 1.5 x 0.9 in (WxDxH) (47.4 x 37.2 x 23 mm)
Weight 2.9 oz (80 grams ) w/o cable
Cable Length 6.5 Feet (2000 mm)
Connector 9-pin Male MiniDIN connector
Mounting 2 threaded (M-3) mounting holes
(not to extend more than 3 mm into the case)
Symbologies Supported
♦
Codabar (NW-7)
♦
Code 39
♦
Code 93
♦
Code 128
♦
Industrial 2 of 5Interleaved 2 of 5
♦
MSI / Plessey
♦
WPC (UPC / EAN / JAN)
♦
IATA
Optical Specifications
Scan Rate 500 scans per second ±10%
Light source 650 ±10nm visible laser diode
Narrow Bar Resolution 6 mil (0.15mm) at 0.9 PCS
Minimum PCS 0.45 (min. background reflectance of 70%)
Reading Distances LPN5627 (Specification) *
Bar Code Density
Near
Distance
Far
Distance
40 mil (1.00 mm) 2.3” 12.6”
20 mil (0.50 mm) 2.3” 10.8”
10 mil (0.25 mm) 2.3” 7.5”
6 mil (0.15 mm) 3.5” 4.7”
* measured from front edge of scanner
Reading Distances LPR5627 (Raster – Specification) *
Bar Code Density
Near
Distance
Far
Distance
40 mil (1.00 mm) 2.3” 10.6”
20 mil (0.50 mm) 2.3” 9.1”
10 mil (0.25 mm) 2.3” 6.7”
6 mil (0.15 mm) 3.5” 4.3”
* measured from front edge of scanner