3.2 OSE Universal Menu Book support *
The OPN2002/3 supports the reading of various configuration options that can be found in
our Universal menu book**. This makes it possible to customize your application without
having to actually change the source code of this demo software.
The OPN2002/3 supports (most of the) menu options listed in the following chapters:
1. Defaults (See the supported default label listed above)
3.1 Enabling/disabling readable codes
3.2 Setting of fixed, minimum and maximum lengths of readable codes
3.3 Code specific options (most options are supported except 2D symbology options)
4.1 Case conversion
4.2 Set prefixes
4.3 Set suffixes
5.1 Read modes, add-on wait modes
5.1.1 Multiple read reset time
5.1.2 Quite zone options (margins)
5.2 Read time options
5.4 Redundancy
5.5 Positive and negative barcodes
6.1 Buzzer settings
6.2 Good read LED options
7.1 Diagnostics
* This demo application does not implement any of the OPN2002s Bluetooth capabilities. A
Bluetooth demo (RFG35312) for the OPN2002 is available on our web site that
demonstrates its Bluetooth capabilities.
** The Universal Menu Book can be downloaded from our web site.
To Next Page
Loading...
Need help?
General
