12 Optomed Aurora
CAUTION!
Only use USB cable and the power source provided by Optomed with this product.
If you need replacement USB cable or power source, please contact the manufacturer or your
local distributor. USB cable must be connected only to the USB port of a PC that complies with the
IEC 60950 standard. Only connect Aurora Charging Station to an electricity supply which corresponds
to the supply voltage of the device.
CAUTION!
The connection between the camera and the PC is USB and/or WLAN. Any authorization procedures should
be carried out in the PC. If the PC is connected to a customer network, make sure the appropriate
safety measures are applied, such as Antivirus and Firewall protection.
CAUTION!
If there are breaks in device covers or other visual defects, contact Optomed Customer Service or
an Optomed-certified service facility.
CAUTION!
Repair and maintenance work may only be performed by authorized specialists. Contact your
Optomed representative for repairs and maintenance work on the device.
| Safety
To Next Page
Loading...
