Kit to block the gas detector and prevent damage
during for example sandblasting or paint work. The kit
will be very visible showing that the detector is blocked.
The kit can be set to force the detector into FAULT as
long as the kit is bocking.
Enables detectors to be mounted in already existing
mounting screws. Simplifying replacing other products.
Bracket and U-bolts to mount the detector to a pole.
To protect the detector from direct sunlight in warm
climates, and to shield from snow building up. For
horizontal installation
Several types to be launched from 2022.
Document 022-80036-OM Revision R03 Page 43 of 48
To Next Page
Loading...