For the drive slot in which you want to install a removable hard drive, rotate the release lever on
the front of the ller to disengage the hook and extend the handle.
Use the handle to pull the ller out of the slot.
“How to Install a Removable Hard Drive Assembly” on page 51
■
“How to Install a Hard Drive Filler” on page 49
■
“How To Remove a Removable Hard Drive Assembly” on page 50
■
“How to Install a Removable Hard Drive Assembly” on page 51
▼
How to Install a Hard Drive Filler
Caution – Thermal over-temperature potential. Do not operate the server without all drive slots
populated with either a drive or a ller.
If your server contains a ller panel, remove the ller panel before installing a hard drive.
Prepare the server for service. See
“How to Prepare for Service”on page 21.
Rotate the release lever on the front of the ller to disengage the hook and extend the handle.
1
2
Next Steps
See Also
1
2
Removing and Installing a Hard Drive Filler and Hard Drive Assembly (CRU)
49
To Next Page
Loading...
