13.
SAW CHAIN
SAW CHAIN
HOW TO TENSION YOUR CHAIN WITHOUT INTENZ™
NOTE: Always wear protective gloves.
➊
Turn the engine off.
NOTE: Never tension your chain right after cutting. Chain tensioned
while hot can cool and contract, causing tension to be much too tight.
Let chain cool first.
➋
Loosen bar-mounting nuts on the side of your saw.
➌
Pull the bar nose up, and keep it up as you adjust tension.
➍
Adjust tension as follows:
If you have a solid-nose bar
➞
Turn your saw’s tension-adjustment screw until the bottoms of the
lowest tie straps and cutters come up and just touch the bottom of
the bar rail.
Read the warnings on page 12.
To Next Page
Loading...
