57.
GUIDE BARS
GUIDE BARS
OREGON
®
GUIDE-BAR MAINTENANCE
ATTENTION:
DEALERS, CHAINSAW USERS, AND ANYONE WHO SERVICES GUIDE
BARS-IMPORTANT SAFETY INFORMATION.
For proper mounting of your guide bar, refer to the operator’s manual
for your chainsaw.
NOTE: • Never use guide bar as a lever to lift, twist, or pry.
• A guide bar requires constant supply of oil during operation.
BASIC GUIDE-BAR-MAINTENANCE TASKS
▲
Before each use.
●
Daily.
■
Often (Hourly, or at
◆
Weekly, periodically.
refueling).
1. ▲■
2. ▲● 3. ▲■
4.
●
Clean bar greasehole
5.
●
Turn nose sprocket while
pumping grease until whole
sprocket has new grease. Do not
push dirt into the hole.
WARNING
Always turn off your saw’s engine before handling the guide bar.
Failure to do so can result in severe injury.
To Next Page
Loading...
