15.
SAW CHAIN
SAW CHAIN
HOW TO TENSION YOUR CHAIN WITH INTENZ™
➊
Turn the engine off.
➋
Loosen the bar mounting
nuts on the side of the saw.
➌
Insert a combination tool blade in the Intenz™ slot of the guide
bar.
➍
Turn the combination tool to move the guide bar forwards, away
from the saw as far as possible.
➎
Tighten the back bar mounting nut, then tighten the front nut
HOW TO LUBRICATE YOUR CHAIN
➊
Keep your saw’s chain-oiling system filled with clean bar-and-chain
oil.
➋
Never put used oil, or old motor oil in your saw or on your chain.
➌
Be sure your chain, bar, and sprocket are always receiving oil from
the saw during operation.
➍
Fill your oil reservoir each time you fill your gas tank.
To Next Page
Loading...
