932502G / 0618 67. SPECIFICATIONS
Bit Meaning
25 Support for flattop optimization (ENA/DIS_OPTI)
26 Stoppable AutoPZ (STOP_PZ_AUTO)
27 Network support (e.g., DSPEC)
28 Multi-drop serial support (e.g., MicroNOMAD
®
)
29 Software-selectable DPM address (SET_DPM_ADDR)
30 Multiple devices (e.g., 919)
31 Software-selectable ADC gate mode (SET_GATE...)
32 Software-downloadable firmware
33 Time histogramming functions available (e.g., 9308)
34 Software-selectable lower level discriminator
35 Software-selectable upper level discriminator
36 MCS-mode SCA input available
37 MCS-mode positive TTL input available
38 MCS-mode fast-negative NIM input available
39 MCS-mode discriminator input available
40 Software-switchable MCS-mode discriminator edge
41 Software-programmable MCS-mode discriminator level
42 Software-programmable SCA upper and lower thresholds
43 Software-selectable MCS-mode input sources
44 Uncertainty/statistical preset (SET_UNCERT_PRES)
45 Features vary by input (SHOW_FEATURES depends on device/segment;multi-input MCBs only)
46 Software-selectable HV shutdown mode (SET/SHOW/VERI_SHUT)
47 Software-selectable shaping time constants (SET_SHAP)
48 Explorable shaping time constants (SHOW_CONFIG_SHAP)
49 Advanced shaping time (SET_SHAP_RISE, SET_SHAPE_FLAT, etc.)
50 Software-selectable BLR (ENA/DIS/SHO_BLR_AUTO SET/SHO/VERI_BLR)
51 SHOW_STATUS command supported (returns $M record)
52 Overflow preset (ENA/DIS/SHO_OVER_PRES)
53 Software-enabled, MicroNOMAD-style audio clicker (ENA/DIS_CLICK)
54 Software-readable thermistor (SHOW_THERM)
55 Floating-point fine gain (SET/SHO/VERI/LIST_GAIN_FINE)
56 Software-enabled pileup rejector. (ENA/DIS/SHO_PUR, SET/VERI_WIDT_REJ)
57 Alpha-style HV power (SHOW_HV_CURRENT)
58 Software-readable vacuum (SHOW_VACUUM)
59 Acquisition alarms (ENA/DIS/SHO_ALARM)
60 Hardware acquisition trigger (ENA/DIS/SHO_TRIG)
73
To Next Page
Loading...
