DSPEC 50
®
and DSPEC 502
®
Digital Gamma-Ray Spectrometer User’s Manual 932502G / 0618
Bit Meaning
61 Ordinal numbers for shaping times (SET_SHAP 0, SET_SHAP 1, ...)
62 Query gain ranges (LIST/VERI_GAIN_FINE, ..._COAR, ..._CONV)
63 Routable inputs (SET/SHOW_INPUT_ROUTE)
64 External dwell support (ENA/DIS_DWELL_EXT)
65 Selectable SUM or REPLACE MCS modes (ENA/DIS_SUM)
66 External start of pass support (ENA/DIS/SHO_START_EXT)
67 Explorable with MCS list commands (LIST_SOURCE, LIST_LLSCA, LIST_ULSCA)
68 Device supports the MDA preset
69 Software-selectable ADC type (Matchmaker™)
70 Has ability to daisy-chain MCBs (DART)
71 ZDT functions available (DSPEC Plus, DSPEC jr, DSPEC jr 2.0, DSPEC Pro)
72 DSPEC Plus-style Insight triggering (LIST/SET_TRIG_SAMP)
73 Multiple inputs per connection (for example, OCTÊTE
®
Plus)
74 Hardware count-rate meter (SH_CRM)
75 Has multiple ZDT modes (SET/SHOW/LIST_MODE_ZDT)
76 Has multi-nuclide MDA preset
77 Has MCS Replace then Sum Mode (SET_RPLSUM)
78 Has programmable external dwell voltage capability
79 No Peak Preset feature (M
3
CA and OASIS)
80 Programmable pulser (OASIS)
81 Programmable Vacuum/HV interlock (OASIS)
82 Programmable Current/HV interlock (OASIS) 0
83 Explorable Stabilizer (LIST_GAIN_ADJU, LIST_ZERO_ADJU)
84 Has programmable input impedance (MCS)
85 Advanced shaping-time feature has no CUSP (digiDART, DSPEC jr 2.0, DSPEC Pro)
86 Selectable HV rise-time (SET/SHOW/LIST_HV_RISE) (SBS-60)
87 —
88 Monitor command support (SHOW_MONI_MAX/LABEL/VALUE)
89 SMART-1 Detector support (SHOW_SMART_DET, SHOW_SNUM_DET, SHOW_HV_RECO)
90 Nuclide report (SET/SHOW_NUCL_COEF, SET/SHOW_ROI_NUCL, ...)
91 Interactive Display Features Such as Nuclide Report
92 Advanced Stored Spectra (SH_SPEC_COUNT, SET/SHOW_SPEC_ID, MOVE)
93 SET/SHOW_VIEW in MCBs with Dual-Port Memory or printer port interfaces, LIST_VIEW in all
MCBs
94 Connected to MCB via RS-232 (slow) port
95 No SET_HV_POSI, SET_HV_NEGA, ENA_NAI and DIS_NAI
74
To Next Page
Loading...
