Need help?Do you have a question about the OSD Audio iDSP and is the answer not in the manual?
General| Brand | OSD Audio |
|---|---|
| Model | iDSP |
| Category | Stereo System |
| Language | English |
Instructions to download the iWoofer app for setting up iDSP features.
Explains how to power the iDSP using a 5V micro USB connection.
Guide on connecting the iDSP to an AV receiver's 'sub out' port using RCA cables.
Instructions for connecting the iDSP's RCA output to a subwoofer amplifier's line-level input.
Recommendations for setting AV receiver and subwoofer amplifier crossovers and disabling EQ for optimal performance.
Preparatory steps and considerations before starting the room correction process.
Manages frequency response measurements and compensation adjustments.
Adjusts the final response to a target shape using FIR filters.
First step of room correction, measuring the subwoofer's initial response.
Second step, taking measurements at the listening position for correction.
Addresses room reflection artifacts from 70Hz and higher to improve bass clarity.
Retains original punch, corrects reflections above 70 Hz.
Adjusts RMS detector for limiting and compression, with options for 'classical limiter' or 'auto-level'.
Dynamic processing band compressor to adjust frequency range, boost, and threshold.
To Next Page
