oset MX-10 Mk.1 - Motor Care and Cleaning Procedures; Motor Performance and Maintenance; Safe Cleaning Methods for the Bike

25
Remove the baeries from the bike before washing.
CAUTION
Do not get water onto the controller, throle or wiring. Failure to follow this in-
strucon could result in permanent damage, and could cause errac machine be-
havior, leading to possible injury or death.
WARNING
Do not clean your bike or battery with water under pressure. Hose, jet wash,
power washer, steam cleaner.
DO NOT SPRAY WITH WATER
MOTOR CARE, PERFORMANCE AND MAINTENANCE
Your OSET is ed with a high powered electric motor which has been designed to work in
unison with your bike. When riding the motor can become hot, if this happens please give
the bike some me to cool down before connuing to ride. This will ensure you get the most
out of your bike.
The motor will last 100’s of hours before it needs any maintenance, when it does it will only
need brushes replacing as they wear when the motor is spinning.
It is strongly recommended that you contact your local dealer/distributor to carry out this
procedure as it requires specialist tools. The OSET motor has been designed for high
performance, to supply high amounts of power for short pulses, perfectly matched for
riding. DO NOT POWER WASH THE MOTOR.
The OSET motor has been designed for high performance. Check that the sprocket bolt is
ght periodically. Waterproof grease can be applied around the sha where it enters the
motor for addional protecon from the elements. Similarly, a bead of silicone can be
applied where the casings join for addional weather protecon.
CLEANING
Cleaning and maintaining your OSET correctly will provide a more enjoyable ownership and
riding experience. By hand cleaning the bike, you can simultaneously inspect all of the
components. We recommend cleaning be done with a damp cloth and slow running water.
Always remove baeries from the bike before cleaning
Take care when washing. This is an electric machine and water should never reach sensive
components.
NEVER USE A POWER WASHER as it can cause irreparable damage to sensive components.
Adequately cover the throle when washing to ensure it is kept dry.