Osram Butler XT2 - Page 26

26
Setup Manual - Butler XT2
Short circuit protection yes, reversible
Over-voltage protection yes
DMX operation Acc. DMX-512A standard
Optical isolation yes, 3 kV max.
e:bus specication
Number of outputs 1 x clamp terminals
Short circuit protection yes, reversible
Over-voltage protection yes
Max. output current 1.2 A
Max. # Glass Touches 8
Optical isolation no
Digital inputs specication
Number of inputs 8 clamp terminals
Optical isolation yes, 3 kV max.
Max. voltage 24 V
Max. current per channel 10 mA
Short circuit protection yes, reversible
Over-voltage protection yes
RS-232
Transfer rate & Configuration 9600 baud, 8 bits, no parity, 1 stopbit
Optical isolation yes, 3 kV
The Butler XT2 is certied according to:
EN 55022, EN 55024, EN 60950
Conforms to ANSi/UL Std. 60950-1.
Certified to CAN/CSA Std. C22.2#60950-1.
4006376