Osram DALIeco Control User Manual

26
5.8 Stand-by-time
Set the duration of STANDBY or switch the STANDBY function to continuous.
• Press one of the push-buttons [Stand-by-time] (SP or LP) to
set STANDBY time for CH-1 and CH-2.
If [Stand-by-time ∞] is selected, the lighting never switches off.
5.9 Daylight and motion-sensing functions
The daylight and motion-sensing functions can be set for:
- all connected sensors together (PROG mode
 5.1)
- each sensor individually (sensor select
 5.12).
Daylight functions
Semi
Auto
Semi
Auto
OFF
OFF
ON
ON
Push-button [ON] • Fully automatic daylight control active
Push-button
[Semi Auto]
• Automatic switch-off with too much daylight
• Manual switch-on
Push-button [OFF] • Daylight control switched off
Motion-sensing functions
Semi
Auto
Semi
Auto
OFF
OFF
ON
ON
Push-button [ON] • Motion-detection active
Push-button
[Semi Auto]
• Automatic change to "STANDBY" or "OFF" after overrun
time has expired
• Manual switch-on
Push-button [OFF] • Motion-detection switched off
5.10 Setting offset
Setting the OFFSET (=distance from CH-2 to CH-1) of a specific function mode.
1. Press push-button [Offset] (SP).
2. Offset is set using the push-button rocker [CH-2]:
- LP = Coarse setting
- SP = Fine setting
The offset of Ch-2 can be:
- min. = value of CH-1
- max. = 100 % brightness
3. Press push-button [Offset] (SP) to save the setting.
5.11 100 h Burn-in
When using fluorescent lamps, stable operation and maximum lifespan are only assured after a
burn-in phase (100 h at 100%). The automatic functions are switched off during burn-in, all lamps
in the system illuminate at 100%.
LEDs on all connected sensors light up red continuously.
1. During commissioning or before regular use of the system
press the push-button [100 h Burn-in ON/OFF] (SP) to start
the process.
2. Press push-button [100 h Burn-in ON/OFF] again (SP) to end
the process prematurely.
Each function call-up restarts the 100 h time period.
Semi
Auto
Semi
Auto
OFFOFF
Stand-by-time
ON
ON
5 min
30 s
30
min
15
min
60
min
emi
Semi
Auto
A
emi
Semi
Auto
A
O
O
F
F
F
O
O
F
F
F
ON
ON
ON
ON
1 2
100 h
Burn-in
PC modes
Offset
ON
OFF
ON
OFF
CH-1 CH-2
Auto
setup
Manual
setup
1 2
100 h
Burn-in
PC modes
Offset
ON
OFF
ON
OFF

Osram DALIeco Control Specifications

General

Brand	Osram
Model	DALIeco Control
Category	Controller
Language	English