24
OTICON AGIL FITTING GUIDE
25
Custom RITE Molds are produced from a traditional, deep
impression. Custom RITE Molds can be ordered as canal or
skeleton style with various modifications. See Custom RITE
Solution Guide for complete overview.
NOTE: Canal and Micro Molds are also available in SOFT
sillicone. These molds slide over the receiver tip and do not
require any tools to install.
RITE Micro Molds for the Standard
or Medium Receiver
The Micro Mold is an acrylic custom solution that can be used
instead of a dome for a RITE fitting.
NOTE: If there is a receiver change from S to M a new Micro/
Custom Rite mold will be needed as the M Receiver is slightly
larger than the S.
Micro Molds are produced from a traditional, deep impression.
The Adapter clearly indicates R (red) /L (blue) color marking.
All custom molds should never be cleaned with a solvent such
as alcohol as it will loosen the wax adaptor over time.
Adapter
WaxStop
Up/Down Indicator
RITE Molds for Standard and
Medium Receivers
Canal
Half shell
Skeleton lock
Canal lock