EasyManuals Logo

oticon Agil Complete Guide

oticon Agil
53 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
84
OTICON AGIL FITTING GUIDE
85
(For installation of the Phone adapter refer to the Installation
Guide and Genie Instruction Videos).
Pairing
1. Assure that Streamer’s key lock is deactivated.
2. Press Streamer Connect button for 5 seconds until the blue
light starts flashing rapidly.
3. Press the red Phone button on the Phone adapter for
5 seconds until the red status indicator flashes.
4. Within half a minute the Phone adapter connects to
Streamer and pairing is complete.
5. The red status indicator of the Phone adapter gives a solid
red light.
6. The blue light in the Streamer Connect button gives solid
light for 5 seconds and then shows slow fading light.
Pairing is done only once and will normally not have to be
repeated.
Daily Use
Phone calls with Streamer
Wear Streamer around the neck in the neck strap, and make
sure that the Connect function is active:
Streamer must be within 30 feet of the Phone Adapter and the
red status indicator on the Phone Adapter must show constant
light.
Incoming calls
A ringing tune is heard in the hearing instruments and
the green rim light around the Phone button flashes.
Answer
Press Streamer’s Phone button shortly. Streamer answers
the call and the green rim light will switch to constant light.
Streamer and the Phone Adapter
The call is now directed into the hearing instruments. Talk in
the direction of the microphone on Streamer. The red status
indicator on the Phone adapter flashes during the call.
Hang up
Press Streamer’s Phone button shortly. Streamer hangs up the
call, the green rim light turns off and the hearing instruments
return to the previous program.
The red status indicator on the Phone adapter switches
to solid light.
Make a call
1. Press Streamer’s Phone button shortly (or shortly press the
red Phone button on the Phone Adapter). You will now hear
the dial tone in the hearing instruments. The green rim light
shows constant light in Streamer’s Phone button.
2. Pick up the phone/phone receiver and dial the phone
number.
3. Put the phone Receiver back down.
The red status indicator on the Phone adapter flashes
during the call.
Hang up
Press Streamer’s Phone button shortly. Streamer hangs up the
call, the green rim light turns off, and the hearing instruments
return to the previous program.
The red status indicator on the Phone adapter switches to
solid light.
Make sure that the phone is turned off, or the Receiver is
back on!

Other manuals for oticon Agil

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the oticon Agil and is the answer not in the manual?

oticon Agil Specifications

General IconGeneral
Brandoticon
ModelAgil
CategoryHearing Aid
LanguageEnglish

Related product manuals