16
OTICON AGIL FITTING GUIDE
17
Attaching the Receiver Unit
The Receiver attachment is the same for all three Receivers.
Insert the Receiver into the shell until it snaps into place.
1
2
3
Receiver with Adapter
Power:
Replacing the Receiver Unit Attaching the Ear Grip
The best way to replace the Receiver is by using the Multi tool
with the dedicated extension point. The extension point is
placed on the screwdriver tip.
Press the Receiver locking lever through the hole to release
the Receiver unit and gently pull the Receiver unit out.
The Ear Grip can be used for better Receiver retention when
using the “
S
” or “
M
” Receiver. The Ear Grip is designed to work
for either the right or left ear. Insert the Ear Grip in the slot in
the Receiver.
To Next Page
Loading...
Need help?
General
