8.11.1 Analysis window
Real Time Traces
Traces in the graph display the eye and head velocity during data collection. You can choose to display or not display a
trace by clicking the check box in the trace legend.
To view an entire trace use the scroll bar below the trace. The report prints the part of the trace seen in the Traces win-
dow centered around the cursor.
8.11.2 Analysis details
Info
The test parameters are listed:
• Test Type – name of test for which data has been collected
• Operator – the person who was logged into OTOSuite Vestibular software when the data was collected
• Calibration ∆ – the distance in pixels between the right and left eye positions measured during calibration
• Test Time – date and time data collection was started
• ElapsedTime – duration of the test
Remarks
Remarksregarding the test can be entered before, during, and after testing. To add or modify remarks, click the Remarks
window tab. For information about the editing tools, refer to the Reference Manual.
Note• Text previously added in the Test window appears in the Remarks window.
38 Otometrics - ICS Impulse USB
8 Oculomotor
To Next Page
Loading...
