Otto Bock Discovery - Appendices; Required Tools; Torque Values of the Screw Connections

9)
Not with option of 600mm back support height with deep back support bracket
Additional information
Discovery
Tyre types Pneumatic or tubeless PU tyres
Front wheels 8"
Rear wheels / drive wheels 12" 22" 24"
Wheelbase 480mm
(18.9")
480mm
(18.9")
505mm
(19.9")
530mm
(20.9")
480mm
(18.9")
505mm
(19.9")
530mm
(20.9")
Seat tilt
1)
0°–35° 0°–22.5° 0°–35° 0°–35° 0°–17.5° 0°–20.5° 0°–35°
Frame width 360mm (14.5") 400mm (16") 450mm (18") 500mm (20")
Distance between arm supports
without spacers 370mm (14.6") 420mm (16.5") 470mm (18.5") 520mm (20.5")
with spacers 420mm (16.5") 470mm (18.5") 520mm (20.5") 590mm (23.2")
Transport weights
2)
Frame with 12" rear wheels 18kg (39.7lbs) 18.5kg (40.8lbs) 19.5kg (43lbs) 20kg (44.1lbs)
Frame with 22"/24" drive wheels 26kg (57lbs) 26.5kg (58.4lbs) 27kg (59.5lbs) 27.5kg (60.6lbs)
22" drive wheel (pair) 3.4kg (7.5lbs)
24" drive wheel (pair) 3.6kg (7.9lbs)
1)
with standard installation of compression springs. The adjustment range can be limited to 15° with the custom
fabrication version with 22"/24" drive wheels and lashing points.
2)
Discovery Standard without leg supports, arm supports and seating unit; the specified weights vary according to
the selected options and model.
Environmental conditions
Discovery
Ambient temperature –10°C to +40°C (14°F to 104°F)
Storage temperature –10°C to +40°C (14°F to 104°F)
Relative humidity 45% – 85%
Permissible tyre pressure (for pneumatic tyres)
INFORMATION
Note the safety instructions regarding air pressure and tyres.
Wheel Wheel size Tyre pressure
1)
Caster wheel 8" 2.5bar (250kPa; 36psi)
12" 2.5bar (250kPa; 36psi)
22" 2.5bar (450kPa; 65psi)
Drive wheel
24" 6bar (600kPa; 87psi)
1)
see also print on the tyre wall
12 Appendices
12.1 Required tools
The following tools are required for adjustments and maintenance work:
• Allen wrenches in sizes 4, 5, 6
• Ring and open-end wrenches in sizes 8, 10, 13, 19 and 24
• Phillips head screwdriver (size: 2)
• Screwdriver (blade width: 3mm)
• Torque wrench (measurement range 5-50 Nm)
12.2 Torque values of the screw connections
Unless otherwise specified, screw connections are tightened with the following torque values:
33Discovery
Appendices