55
23
24
7.3 Armrests
Snap the armrests into the retainers (Fig. 25) on the seating unit while simultaneously pressing
the spring knobs. Press the spring knobs at the same time. To remove the armrests, press the
spring knobs and pull the armrests upwards off the retainers.
Attention!
The armrests must not be used for lifting the seating unit or the entire rehab buggy/
stroller. Armrests cannot be combined with a “Grabrail“ or “Tray“.
7.4 Pelvic Band
The pelvic band (Fig. 36) serves the fixation and positioning of the pelvis of the patient in the
seating system.
For information on mounting and handling please refer to the instructions for use enclosed with
the product.
25
26
To Next Page
Loading...
