Need help?Do you have a question about the Outback S3 and is the answer not in the manual?
General| Brand | Outback |
|---|---|
| Model | S3 |
| Category | Automobile Accessories |
| Language | English |
Provides a general introduction to the Outback S3 GPS guidance system features and capabilities.
Lists the components that are part of the standard Outback S3 kit for installation.
Outlines the initial tasks required for safe and correct operation of the Outback S3.
Details the steps for physically installing the S3 console, antenna, and cables.
Explains how to power on the S3, both standalone and with connected steering systems.
Describes the S3 console display, control buttons, tabs, and initial system configuration.
Explains how to navigate and utilize different map display modes and views on the S3.
Covers fundamental operations like starting jobs, straight/pivot guidance, and contour guidance.
Details how to create, load, export, and manage job data and templates on the S3.
Explains how to set up and follow A-B lines, grids, and free-form contour guidance.
Describes the process of recording and using field perimeters for area calculation and guidance.
Introduces the different differential correction methods supported by the S3 system.
Explains how to select, initialize, and update e-Dif for differential GPS corrections.
Discusses how the S3 can share DGPS signals with external mobile applications.
Details how to configure NMEA settings for communication with other devices.
Provides steps to test the antenna voltage to ensure proper power and cable integrity.
Explains how to check the Bit Error Rate (BER) to assess SBAS signal reception.
Answers common questions about GPS, DGPS, WAAS, and their application in guidance.
Addresses common queries regarding S3 operation, memory, and guidance modes.
Describes the System, Display, and Codes screens accessible from the Setup tab.
Details the screens related to GPS setup, NMEA, Radio, L-Band, e-Dif, and GPS Details.
Explains the various vehicle and implement settings configurable on the Vehicle tab.
Details the operations available on the Job tab for managing jobs and templates.
Describes the map display options, zoom functions, and information displayed on the Map tab.
To Next Page
