OvisLink
- 19
computer.
DMZ WAN IP Address Enter the WAN IP Address set for DMZ Host.
UNDO Click to clear all the settings on this page.
ADD After completing the settings on this page, click
“ADD” to save the settings.
DMZ List Display all the DMZ hosts.
DELETE ALL Click to delete all the DMZ host(s) on the list.
DELETE Click on the Index drop-down menu to select the
desired host number and then click DELETE to delete
only the selected host.
Packet Filters
In the Packet Filters setup screen, you can block specific internal users from accessing
the Internet and you can also disable specific Internet services. You can set up the filters
through the following three filter. Each filter can be set to filter (drop) or forward
(pass) packets. You can input up to 24 filters in this device.
Network Adapter Address Filter
Filter/Forward Click the radio button to filter or forward the computer
according to local computer’s network adapter MAC address
you enter in the next field.
Adapter Address Enter the MAC address of the computer that you want to
filter/forward.
UNDO Click to clear all the settings on this page.
ADD After completing the settings on this page, click “ADD” to
save the settings.
IP Address Filter
Filter/Forward Click the radio button to filter or forward the computer
according to local computer’s IP address you enter in the next
field.
Single/Range You can filter a single IP, or a range of the IP addresses.
IP Range Enter the Start and End IP addresses for a range of IP addresses
for filter/forward.
Direction ?From Local IP: filtering IP address of a local computer; or
?To Remote IP filtering IP address of a remote server (this
remote server connects to the device via Internet).
UNDO Click to clear all the settings on this page.
ADD After completing the settings on this page, click “ADD” to
save the settings.
TCP/UDP Port Filter: Filter using the port number. You can set filter for a single port
or a range of ports.
To Next Page
Loading...
