Need help?Do you have a question about the Ovislink Wireless Router and is the answer not in the manual?
Compliance with FCC RF radiation exposure limits for uncontrolled environments.
Overview of network setup and router capabilities, including IEEE 802.11b support.
Details the function of front panel LEDs and rear panel ports for device status and connectivity.
Guides on default passwords, security, and essential ISP data for initial configuration.
Configures the internet connection mode, supporting CATV, PPPoE, and Static IP.
Sets up dynamic IP address acquisition from ISP for Cable Modem internet services.
Configures PPPoE for xDSL connections, enabling automatic internet access.
Provides manual IP, subnet mask, and gateway entry for leased line connections.
Configures LAN interface, IP distribution, and static DHCP for local network devices.
Manages automatic IP assignment and static DHCP for specific computer configurations.
Manages wireless network settings, including ESSID, security (WEP), and channel.
Covers admin password, access limits, WAN request blocking, and virtual server setup.
Enables port forwarding to specific local servers for internet access to services.
Exposes a computer to the internet for specific application connections, bypassing NAT.
Configures filters for MAC, IP, and TCP/UDP ports to control network traffic.
Manually defines static routes for network traffic management and routing control.
Configures the router to monitor email accounts and signal new emails via LED.
Aliases dynamic IP to a static hostname for consistent internet accessibility.
Provides real-time status of WAN IP, active sessions, and connected users.
Resets device to defaults and allows saving/loading configurations.
Guides on downloading and installing new firmware to update the router's software.
Addresses MAC address needs, defines DMZ, and explains Dynamic DNS services.
Explains how to identify PPPoE connection status and resolve IP address conflicts.
Provides steps to diagnose and resolve issues preventing internet access.
Lists and explains status indicators for PPPoE internet connections.
Describes status messages for IP address acquisition via DHCP and static assignment.
General| Wireless Standards | IEEE 802.11b/g/n |
|---|---|
| Frequency Band | 2.4 GHz |
| Maximum Data Rate | 300 Mbps |
| Antenna | 2 x External Antennas |
| Ports | 4 x 10/100 Mbps LAN, 1 x 10/100 Mbps WAN |
| Security | WEP, WPA, WPA2 |
To Next Page
