EasyManuals Logo

Paccar MX-13 Programming Guide

Paccar MX-13
105 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #49 background imageLoading...
Page #49 background image
PEC017
5/3/2018 Page 49 of 105
Particular applications will require the use of a split-shaft transfer case to decouple
the drive axles and fully divert engine power to auxiliary equipment. The Split Shaft
PTO Installed parameter must be enabled in the CECU using the Electronic Service
Analyst (ESA) tool. Enabling this parameter will allow the transmission to be in gear
while the parking brake is engaged without displaying the associated warnings and
audible alarms. PACCAR recommends consulting the transmission and/or transfer
case manufacturer for details on proper configuration for split-shaft PTO devices.
Note: PTO functionality for remote station controls and hardwired PTO
engagement feedback is not currently available for vehicles equipped with
Allison and Ultrashift transmissions in applications which require the
transmission to be in-gear during PTO operation. Vehicles with these
configurations and requirements must rely on in-cab control configurations to
allow PTO mode functionality, or provide J1939 PTO message to request the
engine to enter PTO mode.

Table of Contents

Other manuals for Paccar MX-13

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Paccar MX-13 and is the answer not in the manual?

Paccar MX-13 Specifications

General IconGeneral
Engine TypeDiesel
Displacement12.9 liters
ConfigurationInline 6-cylinder
Horsepower Range405-510 hp
Torque Range1450-1850 lb-ft
Bore5.12 inches
Fuel SystemCommon Rail
EmissionsGHG17 compliant
Oil Capacity42 quarts
Coolant Capacity56 liters
AftertreatmentDiesel Particulate Filter (DPF), Selective Catalytic Reduction (SCR)
Stroke6.42 inches (163 mm)

Related product manuals