Paccar MX-13 Programming Guide

PEC017
5/3/2018 Page 51 of 105
The following tables provide information relating to each of the six selectable control
configurations, including sales codes, required parameter settings, and an indication
to which control station inputs are enabled. The listed parameters in each table are
automatically selected and/or required by the sales code, and deviating from these
required parameter values will likely cause errors when processing changes in
PACCAR Vehicle Pro.
PTO Control
Configuration
In-Cab
Throttle
Pedal
In-Cab
Set &
Resume
Switches
Remote
Throttle
Control
Remote
Set &
Resume
Switches
Mobile
Cab Station
Accelerator Only
2092046
1000291
Enabled
Disabled
Disabled
Disabled
Parameter
Number
Parameter Description
Required Value
N078
Disable PTO Mode w/Clutch Depressed
OFF
N079
Require Parking Brake for PTO Mode
OFF
N086
Maximum Engine Speed using Switch Inputs
IDLE (N052)
N089
Neutral Required for PTO Mode
OFF
N110
Engine Speed Capture or Engine Speed Preset w/ Set
Switch
CAPTURE (1)
N102
Signal Source for Remote Main Switch
0
N306
Enable Engine Speed Control via TSC1
OFF
N307
Disable In-Cab Accelerator Pedal in Remote PTO
OFF
Table 12.1 – Mobile Cab Station Accelerator Only Configuration

Paccar MX-13 Specifications

General

Engine Type	Diesel
Displacement	12.9 liters
Configuration	Inline 6-cylinder
Horsepower Range	405-510 hp
Torque Range	1450-1850 lb-ft
Bore	5.12 inches
Fuel System	Common Rail
Emissions	GHG17 compliant
Oil Capacity	42 quarts
Coolant Capacity	56 liters
Aftertreatment	Diesel Particulate Filter (DPF), Selective Catalytic Reduction (SCR)
Stroke	6.42 inches (163 mm)