Paccar MX-13 Programming Guide

PEC017
5/3/2018 Page 59 of 105
Graph 12.1 – Regen in PTO Mode Capability Map (ISO Conditions)
Graph 12.1 indicates when DPF regeneration can occur. If the engine is operated in
the green region, a DPF regen will likely be successful and Regen in PTO Mode will
be beneficial to the vehicle. If the engine is operated in the blue region, a DPF regen
is not likely to be successful and the engine should not be programmed with the
Regen in PTO mode option. For additional information or ordering assistance, please
contact the Engine Support Center.
The engine may also be configured to engage the engine fan during active DPF
regenerations while in PTO mode. Engaging the fan can provide additional engine
load and exhuast heat, which may result in more effective DPF regeneration. The
engine fan can also provided additional cooling capacity during DPF regenerations.
Orderable Feature Options & Sales Codes
Feature
Mobile Cab Station Accelerator Only
1000291
2092046
Mobile Cab Station Accelerator + Switches
1000292
2092047
Stationary Cab Station Switches Only
1000293
2092048
Stationary Cab Station Switches + Accelerator
1000294
2092049
Stationary Remote Station Switches + Accelerator
1000295
2092052
Stationary Remote Station Switches Only
1000296
2092053
1 Remote PTO Preset Engine Speed
1000051
2140360
2 Remote PTO Preset Engine Speeds
1000052
2140370
Enable Regen in PTO Mode
1000174
2092089
Engine Fan Assist during Active Regen in PTO
1000176
2092091

Paccar MX-13 Specifications

General

Engine Type	Diesel
Displacement	12.9 liters
Configuration	Inline 6-cylinder
Horsepower Range	405-510 hp
Torque Range	1450-1850 lb-ft
Bore	5.12 inches
Fuel System	Common Rail
Emissions	GHG17 compliant
Oil Capacity	42 quarts
Coolant Capacity	56 liters
Aftertreatment	Diesel Particulate Filter (DPF), Selective Catalytic Reduction (SCR)
Stroke	6.42 inches (163 mm)