PREVENTIVE MAINTENANCE SCHEDULE PART 8: MAINTENANCE AND SERVICE
– 152 – Y53-6032 (R05/10)
Main & aux-
iliary
trans-
mission
(Meritor)
Transfer Case Check the oil level; refill as required (see page 169
). X X
Drain lubricant while warm. Flush each unit with clean flushing oil.
X
Air Intake Air intake piping, mounting,
and charge air cooler
Check the system for broken pipes, leaks, joint integrity, cleanliness, and
proper support (see page 212
).
X
Engine air intake tubing Disassemble, clean, check for cracks, leaks, and joint integrity. X
Cold starting aids Check for leaks and proper operation (see page 94
). X
Air cleaner Replace the element as indicated (see page 212
). When required by the air
restriction indicator
Clutch Clutch pedal shaft Check for excessive looseness and lubricate (NLGI #2 grease). X
Clutch pedal Check for proper pedal free travel (see page 203
). X
Clutch release linkage Check for excessive looseness and lubricate (NLGI #2 grease). X
Clutch release bearing Lubricate. X
Clutch release shaft Lubricate. X
Cooling Components Check the radiator and heater hoses for leaks. X X
Radiator Pressure Cap Check radiator pressure cap X X X X X X
Table 2 Preventative Maintenance Schedule (Continued)
SYSTEM COMPONENT MAINTENANCE TASK
Recommended
PM Interval
I ABCDE
Y53-6032.book Page 152 Monday, May 24, 2010 3:37 PM
To Next Page
Loading...
