PART 4: CONTROLS AND DISPLAYS STEERING COLUMN-MOUNTED CONTROLS
(R05/10) Y53-6032 – 35 –
4. Rotate the MCS knob to change the minutes.
Press the MCS.
5. Rotate the MCS to toggle AM/PM. Press the
MCS
6. Rotate the MCS to select Exit. Press the MCS to
exit the settings function.
To Turn Alarm ON/OFF:
1. When in the Settings Menu, scroll through the
list of menu items to "Alarm". Press the MCS.
2. Press the MCS to turn the alarm ON or OFF.
To Set Units of Measure:
1. When in the Settings Menu, scroll through the
list of menu items to "Units". Press the MCS.
2. Press the MCS to display either Standard or
Metric units.
To Set Language:
1. When in the Settings Menu, scroll through the
list of menu items to "Language". Press the
MCS.
2. Rotate the MCS to display either English, Span-
ish or French. Press the MCS knob to select the
desired language.
Steering Column-Mounted Controls
Turn Signal and Indicator Lights
NOTE: The ignition key must be turned to ON for
the signal/switch to operate.
Your turn signal lever is mounted on the left side of the steer-
ing column below the steering wheel. Green directional indi-
cator lights appear on the instrument panel. To operate the
signal, move the lever in the direction of the turn. Each time
the turn indicator is activated the audbile alarm emits a short
beep.
Y53-6032.book Page 35 Monday, May 24, 2010 3:37 PM
To Next Page
Loading...
