PART 4: CONTROLS AND DISPLAYS INSTRUMENTS AND CONTROLS
(R05/10) Y53-6032 – 17 –
Instruments And Controls
Menu Control Switch (MCS)
The MCS is used to navigate the Driver Information Dis-
play unit.
The Menu Control Switch is located on the D Panel
as shown in the illustration below.
The MCS has the following functions:
• Rotating the MCS
– Selecting display
– Setting values
• Pushing the MCS
– Confirming desired selection
Standard Warning Lights and Audible Alarm
The warning lights and audible alarm may indicate a sys-
tem malfunction. Check the lights frequently, and respond
properly as soon as you see one go on. These lights could
save you from a serious accident.
WARNING! Do not ignore a warning light or
audbile alarm. These signals tell you some-
thing is wrong with your vehicle. It could be a
failure in an important system, such as the
brakes, which could lead to an accident
involving death or personal injury. Have the
appropriate system checked immediately.
1. Driver Information Display 2. Status Indicator
3. Light Bar
3
2
1
Y53-6032.book Page 17 Monday, May 24, 2010 3:37 PM
To Next Page
Loading...
