DRIVER INFORMATION DISPLAY PART 4: CONTROLS AND DISPLAYS
– 30 – Y53-6032 (R05/10)
Driver Information Display
WARNING! Do not look at the Driver Informa-
tion Display for prolonged periods while the
vehicle is moving. Only glance at the monitor
briefly while driving. Failure to focus to the
vehicle’s road position could lead to an acci-
dent involving death, possible personal injury
or equipment damage.
The Driver Information Display, located at the top of the
instrument cluster, displays important vehicle information
through a constant monitoring of systems when any of the
following conditions are met:
• ignition key in ON or ACC positions
• ignition timer is active
• MCS button is pushed (independent of ignition key
switch position)
• clock alarm sounds
• driver or passenger door is opened
• hazard warning lamp switch is on
The various functions may be accessed by navigating
through Menu Screens using the MCS. Refer to “Menu
Control Switch (MCS)” on page 17 for more detail for the
MCS.
The bullets in the Menu Bar allow access to each item by
pushing the MCS when the desired bullet is highlighted.
Y53-6032.book Page 30 Monday, May 24, 2010 3:37 PM
To Next Page
Loading...
