PART 8: MAINTENANCE AND SERVICE PREVENTIVE MAINTENANCE SCHEDULE
(R05/10) Y53-6032 – 163 –
Master Lubrication Index
NOTE: The responsibility for meeting these specifi-
cations, the quality of the product, and its perfor-
mance in service rests with the lubricant supplier.
Table 3 Lubricant Symbol Key
ATF Dextron III/Mercon approved Automatic Transmission
Fluid
BB Ball Bearing grease
CB Engine oil for mild to moderate requirements
CC/CD Engine oil for severe requirements (MIL-L-2104B /MIL-L-
45199B w/ 1.85% max. sulfated ash content)
CD Engine oil meeting API “Five engine test sequence”
CD50 SAE50W synthetic transmission fluid
CE Engine oil meeting severe duty service requirements for
direct-injection turbocharged engines
CJ-4 Engine oil
CL Multipurpose chassis grease
C4 Type C4 transmission fluid (torque fluid)
EP Extreme Pressure Lubricant
GL Straight mineral gear lubricant
HD Hypoid Gear Oil, A.P.I. - GL-5, SAE 80W-90
HT High Temperature grease (Timken Spec. 0-616)
MP Multipurpose gear lubricant (MIL-L-2105B)
WB Wheel Bearing grease (Timken Spec. 0-610)
Table 3 Lubricant Symbol Key
Y53-6032.book Page 163 Monday, May 24, 2010 3:37 PM
To Next Page
Loading...
