STEERING COLUMN-MOUNTED CONTROLS PART 4: CONTROLS AND DISPLAYS
– 38 – Y53-6032 (R05/10)
lever is released, the wipers will shut off automatically or
resume the wiper’s setting speed.
To activate the wipers for one swipe without activating the
washer (“mist” function), push the turn signal lever in
(towards the steering column) and release in less than 0.5
seconds. The wipers will perform a single swipe and then
resume the wiper’s setting speed.
WARNING! Clean blades regularly with a
damp cloth to remove road film and wax build-
up. Do not drive with worn or dirty wiper
blades. They can reduce visibility, making
driving hazardous which may lead to an injury
accident resulting in death or personal injury.
CAUTION:
• Do not use antifreeze or engine coolant in
the windshield washer reservoir—damage to
seals and other components will result.
• If the electric pump is operated for a long
period (more than 15 seconds) with a dry res-
ervoir, the pump motor may be damaged.
Check the windshield washing fluid level daily. If neces-
sary, fill to top.
Clean all inside and outside windows regularly. Use an
alcohol-based cleaning solution and wipe dry with either a
lint-free or a chamois cloth. Avoid running the wiper
blades over a dry windshield to prevent scratching the
glass. Spray on washer fluid first. A scratched windshield
will reduce visibility.
Y53-6032.book Page 38 Monday, May 24, 2010 3:37 PM
To Next Page
Loading...
