Pace ST 115 - FACTORY SETTINGS

25
Operation
FACTORY SETTINGS
The ST 115 system comes equipped with a number of features which may be
adjusted, enabled or disabled as desired by the user. Listed below are the features
and factory settings of each. To change and/or learn about any of these features,
refer to the applicable part of the “Set-Up Mode” portion of this manual.
Table 1. Factory Settings
FEATURE
FACTORY
SETTING
Password None Entered
Default Temperature Scale (°C/°F)
°F for 115V
Systems
°C for 230V
Systems
"Hi L" (upper) Temperature Limit 482°C (900°F)
"LO" (lower) Temperature Limit 204°C (400°F)
Set Temperature "OFF"
Tip Offset Constant "0"
Temperature Setback Enabled
Setback Time 30 Minutes
Auto Off Enabled
Time To Auto Off 30 Minutes