Packet8 6755i - Incoming Call Interrupts Dialing

110 — Model 6755i Series IP Phone User Guide
Additional Features
If you enable the Display DTMF Digits parameter, the digits you are dialing from
the keypad or from a programmable key display to the IP phone’s LCD display.
This parameter is disabled by default (no digits display when dialing).
You can enable the Display DTMF Digits parameter using the Packet8 Web
Phone UI.
Configuring Display of DTMF Digits
Use the following procedure to configure the display of DTMF digits on the IP
phone.
1. Click on Basic Settings->Preferences->General.
2. Enable the Display DTMF Digits field by checking the check box.
Disable this field by unchecking the box). Default is disabled.
3. Click to save your settings.
Packet8 Web Phone UI
Note: "Display DTMF Digits" is disabled by default.