Model 6755i Series IP Phone User Guide — 73
Making Calls
You can set specific incoming Intercom call features on the 6755i IP phone using
the Packet8 Web Phone UI. The following table describes these features.
For more information about the incoming Intercom features and for procedures
on setting these features, see "Incoming Intercom Call Features" on page 122.
Redial
• Press to dial the most recent number you dialed from the phone.
• If you are off-hook and press the last number you called is called
back.
• If you are on-hook and press , a Redial Directory list appears on-
screen.
The redial list is available during active calls. It stores up to the last 100 numbers
you called, allowing you to scroll through and select the number you wish to
redial.
Incoming Intercom
Features in
Packet8 Web Phone UI Description
Microphone Mute Allows you to enable or disable the microphone on the IP
phone for Intercom calls made by the originating caller.
Auto Answer Allows you to enable or disable the IP phone to
automatically answer an Intercom call. If auto-answer is
enabled on the IP phone, the phone plays a tone (if "Play
Warning Tone" is enabled) to alert the user before
answering the Intercom call. If auto-answer is disabled, the
phone rejects the incoming Intercom call and sends a busy
signal to the caller.
Play Warning Tone Allows you to enable or disable a warning tone to play
when the phone receives an incoming Intercom call on an
active line.
Allow Barge In Allows you to enable or disable how the phone handles
incoming Intercom calls while the phone is on an active
call.
IP Phone UI
Note: Your System Administrator can set your Redial key to speeddial
a specific number. Contact your System Administrator for more
information.
Redial
Redial
Redial
To Next Page
Loading...