Model 6755i Series IP Phone User Guide — 61
Line Keys, Programmable Keys, and Softkeys
Click on Operation->Expansion Module <N>.
2. For softkeys, select from "Key 1" through "Key 20" or for programmable keys,
select from "Key 1" through "Key 6".
3. In the Type field, select Directory.
4. In the Label field, enter a label to apply to this key.
5. If configuring a softkey on the Bottom Keys, in the state fields, check (enable)
or uncheck (disable) the states you want to apply to this softkey.
6. Click to save your changes.
Callers List Key
By default, the 6755i has a Callers List key configured on key 3 of the top set of
keys. However, using the Packet8 Web Phone UI, you can assign the Callers List
key to any key on the top or bottom keys on the phone.
The Callers List is a stored log of your incoming calls. You can use the Callers
List key to access a list of callers that called your phone.
Reference
For more information about the Callers List, see "Callers List" on page 93.
Goodbye
Holed
Redial
Options
Line 3
Line 2
Line 1
Speaker/
Headset
Mute
Line 4
Callers List
Key
To Next Page
Loading...