Model 6755i Series IP Phone User Guide — 19
Phone Status
Phone Status
You can view the status of your phone using the IP Phone UI or the Packet8 Web
Phone UI.
Phone Status via IP Phone UI
The Phone Status option on the IP phone displays the status of your phone to
the LCD display.
This option allows you to view your phone’s:
• Network status including your phone’s IP and MAC address
• Local Area Network (LAN) port
•PC port
•Firmware version
Use the following procedure to view the status of your phone using the IP Phone
UI.
Basic
Settings
Preferences - Allows you to enable/disable the following:
• Static Pickup call
•Suppress DTMF Playback
• Display DTMF Digits
• Call Waiting
• Play Call Waiting Tone
• Stuttered Dial Tone
•XML Beep Support
• Status Scroll Delay
• Incoming Call Interrupts Dialing
• Goodbye Key Cancels Incoming Call
• UPnP Mapping Lines
• Message Waiting Indicator Line
This category also allows you to configure:
• Incoming Intercom Call Settings
• Ring Tones (global and per-line basis)
•Ring Tone Sets
• Time and Date Settings
• Language Settings
Call Forward - Allows you to set a phone number destination for where
you want calls forwarded. Call forward can be configured using a
specific mode (off, all, busy, no answer, busy no answer) on a global or
per-line basis.
Headings Descriptions
To Next Page
Loading...