Model 6755i Series IP Phone User Guide — 59
Line Keys, Programmable Keys, and Softkeys
Setting Services Key
Use the following procedure to configure a Services key on the 6755i IP Phone.
The procedure shows the programmable key screen as an example.
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Programmable Keys.
or
Click on Operation->Expansion Module <N>.
2. For softkeys, select from "Key 1" through "Key 20" or for programmable keys,
select from "Key 1" through "Key 6".
3. In the Type field, select Services.
4. In the Label field, enter a label to apply to this key.
5. In the Line field, select the line you want to apply to this key. Valid values are 1
through 9.
6. If configuring a softkey on the Bottom Keys, in the state fields, check (enable)
or uncheck (disable) the states you want to apply to this softkey.
7. Click to save your changes.
Packet8 Web Phone UI
Note: By default, Key 1 on the top set of programmable keys is configured
for Services.
To Next Page
Loading...